HDTV Modulator - IPTV Encoder
The dual-channel QMOD-HDMI 2 with two non-HDCP HDMI inputs, offers a new option for digital signage encoding and video distribution over CATV system. Dual hardware scalers accept content up to 1080p, shape VGA signage for edge-to-edge presentation, and compensate for non-broadcast and PAL refresh rates. Able to deliver two HD programs in one channel, the QMOD-HDMI 2 can also output the content as a Multicast or Unicast IPTV stream. Options include easy front-panel setup, dual-language SAP audio and Emergency Alert System capabilities. Web setup, monitoring, and firmware updates are available via USB and Ethernet ports. Dual unit rack mounting offers up to four programs per rack space, with the ability to mix models to handle HDMI, SDI, Component, RGBHV and NTSC video sources. Firmware update version 2.3.4 reduces end-to-end RF latency to 500 ms and adds RTP protocol for IP streaming.
Sources
- Two HDMI inputs, accept from 480i/29.97Hz to 1080p 59.94/60 Hz video
- Accepts embedded HDMI Dolby AC-3 and PCM audio
- Two Composite/CC video input for encoding, captioning, or EAS use
- Two analog Stereo and two SPDIF coax audio inputs
Encoding
- Creates SD and high-definition MPEG-2 and/or H.264 streams at 480i, 480p, 576i, 720p, or 1080i for distribution.
- Accepts stereo or PCM audio and converts to Dolby Digital AC-3/, with SAP dual-language capability.
- Embeds captioning from Line 21 data on composite video inputs.
- Dual hardware scalers enable precise formatting of digital signage for edge-to-edge presentation. Units accept up to1080p 30/60 Hz and PAL video, as well as, common computer graphics resolutions while delivering programs at a fixed resolution.
- Dual-channel operation is standard, creates one physical channel with two HD programs.
- Output
- Delivers fully agile QAM 64/256 digital cable channels 2-135, or 8VSB off-air channels 2-69
- Up to 268 HD Programs, 134 Channels per system
- Streams Multicast or Unicast IPTV from GigE Ethernet port
- Distributes channel over an on-site broadband cable system with adjustable output level up to 29 dBmV, compatible with all CATV format broadband systems
Operation
- Set up with front-panel buttons and easy to use menus; including inputs, encoding, channel, and RF options or use onboard Web page for setup and monitoring
- Update firmware from USB or Ethernet
- Fan cooled, with variable speed
- Includes compact switching power supply
- Saves power and rack space using efficient ½ rack width design
- Mounts in optional 1RU single (RK1) or dual (RK2EZ) 19” rack mount kits
- Meets RoHS safety and California energy standards
- Firmware Updates
- Firmware is updated using CR Toolbox
- Click the Downloads tab to view the link to download CR Toolbox
- Updates to the QMOD/QIP can be made through the rear panel Ethernet port or the front panel USB port
- When launched, CR Toolbox will check for newer firmware versions
Includes: PS12-2 Power Supply*, two 3.5mm to RCA Audio Cables, &Universal Rack Mount Kit
- Two HDMI (non-HDCP) inputs: up to 1080p video and audio
- Accepts stereo, PCM, or pass-through AC-3 audio with two sets of stereo and SPIDF inputs
- Hardware scalers allow many resolutions, 59.94/60 Hz, and PAL
- Creates a high-definition 720p/1080i MPEG-2/H.264 stream
- Streams IPTV through GigE Ethernet port, simultaneous QAM digital cableoutput and IPTV Stream